manualshive.com logo in svg

HIKVISION DS-PHA20-M, User Manual, Page: 17 / 127

Share
Download
HIKVISION DS-PHA20-M User Manual Download Page 17

Chapter 4 Configuration

Configure the security control panel in the web client or the remote configuration page in client

software.

4.1 Use the Client Software

Steps

1. Download, install and register to the client software.

2. Add device in Device Management → Device .

Note

• Set the device port No. as 80.

• The user name and password when adding device are the activation user name and

password.

3. Click   to enter the Remote Configuration page after the device is completely added,

4.2 Use the Web Client

Steps

1. Connect the device to the Ethernet.

2. Search the device IP address via the client software and the SADP software.

3. Enter the searched IP address in the address bar.

Note

When using mobile browser, the default IP Address is 192.168.8.1. The device must be in the AP

mode.

Note

When connecting the network cable with computer directly, the default IP Address is 192.0.0.64

4. Use the activation user name and password to login.

Note

Refer to Activation chapter for the details.

Hybrid Security Control Panel User Manual

9

Summary of Contents for DS-PHA20-M
































































































































Reviews:

No comments