manualshive.com logo in svg

HIKVISION DS-PHA20-M, User Manual, Page: 79 / 127

Share
Download
HIKVISION DS-PHA20-M User Manual Download Page 79

Figure 4-46 Fault Check

Detect Network Camera Disconnection

If the option is enabled, when the linked network camera is disconnected, an alarm will be

triggered.

Battery Supervision

If the option is enabled, when battery is disconnected or out of charge, the device will not

upload events.

Wired Network Fault Check

If the option is enabled, when the wired network is disconnected or with other faults, the alarm

will be triggered.

Wi-Fi Fault Check

If the option is enabled, when the Wi-Fi is disconnected or with other faults, the alarm will be

triggered.

Cellular Network Fault Check

If the option is enabled, when the cellular data network is disconnected or with other faults, the

alarm will be triggered.

SIM Card Fault Check

If the option is enabled, the alarm will be triggered for faults of the SIM card.

Telephone Line Cut Off Detection

If the option is enabled, the alarm will be triggered when telehphone is disconnected.

RS-485 Exception Detection

Hybrid Security Control Panel User Manual

71

Summary of Contents for DS-PHA20-M
































































































































Reviews:

No comments