HIKVISION DS-PHA20-M, User Manual, Page: 43 / 127

What to do next
Click Zone → Zone Module , you can see the zone module information including module status,
module addresss, module channel No., and module type.
Sounder
The sounder is enrolled to the control panel via the wireless receiver module, and the 868 Mhz
wireless sounder can be enrolled to the hybrid control panel via the wireless receiver that is at the
address of 9.
Steps
1. In the client software, select the device on the Device Management page and click , or enter
the device IP address in the address bar of the web browser and log in.
2. Click Configuration → Device Management → Sounder to enter the Sounder page.
3. Click to enter the Sounder Settings page.
Figure 4-20 Wired Sounder Settings
Figure 4-21 Wireless Sounder Settings
4. Set the sounder name, the volume and module name.
Note
The available sounder volume range is from 0 to 3 (function varies according to the model of
device).
5. Check linked areas.
6. Optional: Enable Enroll Wireless Sounder and set the sounder serial No.
Note
The sounder in 868 MHZ may not support this function.
Hybrid Security Control Panel User Manual
35