manualshive.com logo in svg

HIKVISION DS-PHA20-M, User Manual, Page: 71 / 127

Share
Download
HIKVISION DS-PHA20-M User Manual Download Page 71

4.3 Use Mobile Client

4.3.1 Download and Login the Mobile Client

Download the mobile client and login the client before operating the security control panel.
Steps

1. Get Hik-Connect mobile client from the following ways.

-

Visit https://appstore.hikvision.com to download the application according to your mobile

phone system.

-

Visit the official website of our company. Then go to Support → Tools → Hikvision App Store

to download the application according to your mobile phone system.

-

Scan the QR code below to download the application.

Figure 4-41 Hik-Connect QR Code

2. Optional: Register a new account if it is the first time you use the Hik-Connect mobile client.

Note

For details, see User Manual of Hik-Connect Mobile Client.

3. Run and login the client.

4.3.2 Activate Control Panel via Hik-Connect

Steps

1. Power on the control panel.

2. Select adding type.

-

Tap   → Scan QR Code to enter the Scan QR code page. Scan the QR code on the control

panel.

Note

Normally, the QR code is printed on the label stuck on the back cover of the control panel.

-

Tap   → Manual Adding to enter the Add Device page. Enter the device serial No. with the

Hik-Connect Domain adding type.

3. Tap   to search the device.

4. Tap Next.

5. Enter the device verification code if required and tap OK.

Hybrid Security Control Panel User Manual

63

Summary of Contents for DS-PHA20-M
































































































































Reviews:

No comments