Fingerprint Access Control Terminal
105
Steps:
1.
Click the
icon on the System Configuration interface to open the Card Dispatcher
Configuration page.
2.
Select the device type, serial port type, serial port, baud rate, and other parameters of the Card
Dispatcher.
3.
Click the save button to save the settings.
Note:
Configuration Instruction
DS-K1F100-M:
select Serial Port Mode as accessing mode (currently only support serial port mode),
the serial port NO. is the COM port NO. of the computer. Set other parameters as default.
D8E-U-A-III:
select USB Mode as accessing mode (currently only support USB mode). Set other
parameters as default.
It is supported using card type as regular and Wiegand.
When the BEEP is selected as “YES”, the audio will be off when you click the “SAVE” if the Card
Reader Configuration is set wrong; the audio will be on when you click the
and when
you insert the card reader if the configuration is set correct.
You can click
(Restore Default Value) to restore the defaults of all the local
configuration.
Fingerprint Machine Configuration
Steps:
1.
Click the
icon on the System Configuration interface to open the Fingerprint
Machine Configuration page.
