Fingerprint Access Control Terminal
14
Steps:
1.
Move the cursor to
Reset
and press the OK key to enter the Reset interface.
Reset Interface
Figure 4. 23
2.
Select
Factory Defaults
or
Default Settings
.
Factory Defaults:
All parameters of the device will restore to the factory
condition.
Default Settings:
All parameters, excluding the communication parameters
and the remote user management, will restore to the factory
condition.
4.3.2.4
Upgrading Device
The system can automatically read the upgrading file from the plugged USB disk to upgrade the device.
Notes:
The upgrading file should be put in the root directory.
The upgrading file name should be digicap.dav.
4.3.3
Setting Time
Purpose:
You are able to set the device time and the DST.
Steps:
1.
Move the cursor to
Time
in the main interface and press the OK key to enter the Time interface.
2.
Edit the parameters.
Date:
The displayed date on the device.
Time:
The displayed time on the device.
DST:
Select to enable or disable the DST. When the DST is enabled, you can
set the DST bias time, the start time and the end time.
DST Bias:
you can select 30min, 60min, 90min and 120min.
Start:
Set the start time of the DST.
End:
Set the end time of the DST.
