Fingerprint Access Control Terminal
3
Chapter 4
Basic Operation
Suggested working flow:
Working Flow
Figure 4. 1
Device Activation:
Activate the device before first using.
Login:
Hold the OK button for 3s to login the device main interface.
Parameters Configuration:
Configure the communication, the system, and the time.
User Management:
Add, edit and delete the users in the fingerprint access control terminal. You are
able to set the user ID No. name, card number fingerprint, password, department, etc.
Access Control Configuration:
Configure the access control parameters and control the door status.
Attendance Configuration:
Configure the attendance parameters and control the users attendance.
Note:
The device has configured the default department, the default shift, the default shift schedule and
the default system information. You are able to use the device directly after adding the user.
Device Activation
4.1
Purpose:
You should activate the device before the first login. After powering on, the system will switch to activate
notifying interface.
Activation Notifying Interface
Figure 4. 2
Activation via SADP and activation via the iVMS-4200 Client Software are supported.
The default values of the terminal are as follows:
The default IP address: 192.0.0.64
The default port No.: 8000
The default user name: admin
4.1.1
Activating via SADP Software
Purpose:
SADP software is used for detecting the online device, activating the device, and resetting the device
password.
