Fingerprint Access Control Terminal
48
Steps:
1.
In the device list, select a device by clicking it, or select multiple devices by pressing Ctrl button on
your keyboard and clicking them one by one.
2.
Click the
button to delete the selected device(s).
3.
Click
OK
button in the popup confirmation dialog to finish deleting.
Bulk Time synchronization
Steps:
1.
In the device list, select a device by clicking it, or select multiple devices by pressing Ctrl button on
your keyboard and clicking them one by one.
2.
Click the
Bulk Time Adjustment
button to start time synchronization.
A message box will pop up on the lower-right corner of the screen when the time synchronization is
compeleted.
Status
In the device list, you can click
Status
button to enter view the status.
1)
Door Status
: The status of the connected door.
2)
Host Status
: The status of the host, including Storage Battery Power Voltage, Device Power Supply
Status, Multi-door Interlocking Status, Anti-passing Back Status, Host Anti-Tamper Status.
3)
Card Reader Status
: The status of card reader.
4)
Alarm Input Status
: The alarm input status of each port.
5)
Alarm Output Status
: The alarm output status of each port.
6)
Event Sensor Status
: The event status of each port.
Remote Configuration
In the device list, you can click
Remote Configuration
button to enter the remote configuration
interface. You are able to configure the voice prompt function.
