HIKVISION DS-K1T803EF User Manual Download

Page: 75 / 128

Fingerprint Access Control Terminal

If a card is associated with the current person, the association will be invalid after the person is
deleted.



Inputting Fingerprint

Steps:

In the personal information interface, click the

Fingerprint

button.

Click the

Start Register

button, and select the fingerprint to be input.

Click the

Save

button to save the parameter.

Note:

Click the

Delete Fingerprint

button to delete the fingerprint.

Click the

Delete All

button to clear all fingerprints input.

5.3.2

Card Management

Click

on the control panel of the software to enter the card management

interface.

The cards are divided into 3 types: Blank Card, Normal Card, and Lost Card.

Blank Card:

A card has not been issued with a person.

Normal Card:

A card is issued with a person and is under normal using.

Lost Card:

A card is issued with a person and is reported as lost.

Summary of Contents for DS-K1T803EF

































































































































Search results

Summary of Contents for DS-K1T803EF

Reviews:

Related manuals for DS-K1T803EF

Brands by name

Popular brands

HIKVISION DS-K1T803EF, User Manual

Search results

Summary of Contents for DS-K1T803EF

Reviews:

Related manuals for DS-K1T803EF

Brands by name

Popular brands