Fingerprint Access Control Terminal
28
The department name supports up to 32 characters.
You can configure the shift in the Configuring Shift. For detailed information, see
Section
4.6.1 Configuring Department
.
By default, the system contains 32 departments.
You can also select
Reset
to reset the settings.
4.6.1.2
Searching Department
Purpose:
Search the target department by entering the department name.
Steps:
1.
Enter the target department name in the searching bar of the department list interface.
2.
Press the OK key to search.
Department List Interface
Figure 4. 52
4.6.2
Configuring Shift
Purpose:
The normal shift and the man-hour shift are available to be configured. You can set the attendance rule and
the attendance checking times in the normal shift. You can also set the working hours per day in the man-
hour shift.
The normal shift can be applied to the normal attendance situation, while the man-hour shift can be applied
to the situation with flexible working hours.
Note:
Support up to 32 normal shifts and 32 man-hour shifts.
4.6.2.1
Normal Shift
Setting the Attendance Rule
Steps:
1.
In the Normal (Normal Shift) interface, select
Rule
.
