Fingerprint Access Control Terminal
44
Manage the access control devices, including adding, editing, deleting, and batch time synchronizing
functions.
Online Device Detection:
Automatically detect online devices in the same subnet with the access control server, and the detected
devices can be added to the server in an easy way.
Note:
The control client can manage 16 access controllers at most.
Device Management
Adding Controller
Steps:
1.
Click the button
to enter the add access controller interface.
2.
Input the device name.
3.
Select the access controller type in the dropdown list.
4.
Select the connection mode in the dropdown list: TCP/IP, or COM port.
TCP/IP:
Connect the device via the network.
5.
Set the parameters of connecting the device.
If you choose to connect the device via network, you should input the IP address and port No. of the
device, and set the Dial-up value to 1.
6.
Click the
button to finish adding.
You can click
Status
to check the detailed status of the controller, and click
Remote Configuration
to
configure the settings of the controller.
Editing Device (Basic Information)
Purpose:
After adding the device, some advanced parameters can be configured in the editing device interface,
e.g. downloading hardware parameters, reading hardware parameters, time synchronizing, configuring
access point, etc.
Steps:
1.
In the device list, click
Edit
button to edit the information of the selected added device.
