Figure 7-11 Temperature Measurement Parameters
The available parameters descriptions are as follows:
Temp. Detection
When enabling the function, the device will authenticate the permissions and at the same time
take the temperature. When disabling the device, the device will authenticate the permissions
only.
Normal Temp.
Edit the threshold according to actual situation. If the detected temperature is higher or lower
than the configured parameters, an alarm will be triggered. By default, the minimum value is
1 °C and the maximum value is 45 °C.
Temperature Compensation
If the measured temperature is higher/lower than the actual object's temperature, you can set
the compensation temperature here. Available range: -99 to 99.
Note
You can select the unit as celsius degree or fahrenheit degree.
Door Not Open (Abnormal Temperature)
When enabling the function, the door will not open when the detected temperature is higher or
lower than the configured temperature threshold. By default, the function is enabled.
Temp. Measurement Only
When enabling the function, the device will not authenticate the permissions, but only take the
temperature. When disabling the function, the device will authenticate the permissions and at
the same time take the temperature.
DS-K1T690 Series Face Recognition Terminal User Manual
68
