Figure 3-4 Secure Device
5. After installation, for the proper use of the device (outdoor use), stick the protection film (parts
of models supplied) on the screen.
3.3 Flush Mounting (Type II)
Steps
1. Cave an installation hole on the wall. Pull the cable out from the wall.
Note
●
The suggested dimension of the installation hole is 324 mm (W) × 337 mm (H) × 47.5 mm (D).
●
The mounting methods is optional. You should pay for the gang box.
2. Install the gang box on the wall, and remove the mounting ears of the gang box.
DS-K1T690 Series Face Recognition Terminal User Manual
9
