Note
●
The supported USB flash drive format is DB.
●
The system supports the USB flash drive with the storage of 1G to 32G. Make sure the free
space of the USB flash drive is more than 512M.
●
The exported user data is a DB file, which cannot be edited.
7.5 Identity Authentication
After network configuration, system parameters configuration and user configuration, you can go
back to the initial page for identity authentication. The system will authenticate person according
to the configured authentication mode.
7.5.1 Authenticate via Single Credential
Set the user authentication type before authentication. For details, see Set Authentication Mode .
Authenticate face, fingerprint, card or QR code.
Face
Face forward at the camera and start authentication via face.
Fingerprint
Place the enrolled fingerprint on the fingerprint module and start authentication via fingerprint.
Card
Present the card on the card presenting area and start authentication via card.
Note
The card can be normal IC card, or encrypted card.
QR Code
Put the QR code in front of the device camera to authenticate via QR code.
Note
Authentication via QR code should be supported by the device.
Password
Enter the password to authenticate via password.
If authentication completed, a prompt "Authenticated" will pop up.
Note
After enabling temperature detection, the device displays the temperature information.
DS-K1T690 Series Face Recognition Terminal User Manual
63
