Set Manual and Auto Attendance via Web
Set the attendance mode as Manual and Auto, and the system will automatically change the
attendance status according to the configured schedule. At the same time you can manually
change the attendance status after the authentication.
Before You Start
Add at least one user, and set the user's authentication mode. For details, see User Management.
Steps
1. Click Configuration → Attendance to enter the settings page.
2. Set the Attendance Mode as Manual and Auto.
3. Enable the Attendance Status function.
4. Enable a group of attendance status.
Note
The Attendance Property will not be changed.
5. Optional: Select an status and change its name if required.
6. Set the status' schedule. Refers to Time Settings for details.
Result
On the initial page and authenticate. The authentication will be marked as the configured
attendance status according to the schedule. If you tap the edit icon on the result tab, you can
select a status to take attendance manually, the authentication will be marked as the edited
attendance status.
Example
If set the Break Out as Monday 11:00, and Break In as Monday 12:00, the valid user's
authentication from Monday 11:00 to 12:00 will be marked as break.
8.6.21 General Settings
Set Authentication Parameters
Click Configuration → General → Authentication Settings .
Note
The functions vary according to different models. Refers to the actual device for details.
Click Save to save the settings after the configuration.
Card Reader
Select Main Card Reader or Sub Card Reader from the drop-down list.
DS-K1T690 Series Face Recognition Terminal User Manual
100
