Clear Registered Face Pictures
All registered pictures in the device will be deleted.
Clear Captured Pictures
All captured pictures in the device will be deleted.
Set Card Security
Click Configuration → General → Card Security to enter the settings page.
Set the parameters and click Save.
Enable NFC Card
In order to prevent the mobile phone from getting the data of the access control, you can
enable NFC card to increase the security level of the data.
Enable M1 Card
Enable M1 card and authenticateingby presenting M1 card is available.
M1 Card Encryption
Sector
M1 card encryption can improve the security level of authentication.
Enable the function and set the encryption sector. By default, Sector 13 is encrypted. It is
recommended to encrypt sector 13.
Enable EM Card
Enable EM card and authenticating by presenting EM card is available.
Note
If the peripheral card reader supports presenting EM card, the function is also supported to
enable/disable the EM card function.
Enable CPU Card
The device can read the data from CPU card when enabling the CPU card function.
CPU Card Read Content
After enable the CPU card content reading function, the device can read the CPU card content.
Enable ID Card
Enable ID card and authenticating by presenting ID card is available.
Set Card Authentication Parameters
Set the card reading content when authenticate via card on the device.
Go to Configuration → General → Card Authentication Settings .
Select a card authentication mode and click Save.
DS-K1T690 Series Face Recognition Terminal User Manual
104
