You can set the door contact as Remain Open or Remain Closed according to your actual needs.
By default, it is Remain Closed.
Exit Button Type
You can set the exit button as Remain Open or Remain Closed according to your actual needs.
By default, it is Remain Open.
Door Lock Powering Off Status
You can set the door lock status when the door lock is powering off. By default, it is Remain
Closed.
Extended Open Duration
The door contact can be enabled with appropriate delay after person with extended access
needs swipes her/his card.
Door Remain Open Duration with First Person
Set the door open duration when first person is in. After the first person is authorized, it allows
multiple persons access the door or other authentication actions.
Duress Code
The door can open by inputting the duress code when there is duress. At the same time, the
client can report the duress event.
Super Password
The specific person can open the door by inputting the super password.
Note
The duress code and the super code should be different.
Set RS-485 Parameters
You can set the RS-485 parameters including the peripheral, address, baud rate, etc.
Click Configuration → Access Control → RS-485 Settings .
Check Enable RS-485, and set the parameters.
Click Save to save the settings after the configuration.
No.
Set the RS-485 No.
Peripheral Type
Select a peripheral from the drop-down list according the actual situation. You can select from
Card Reader, Extension Module, Access Controller, or Disable.
Note
After the peripheral is changed and saved, the device will reboot automatically.
DS-K1T690 Series Face Recognition Terminal User Manual
111
