Input
The device can connect a Wiegand card reader.
Output
The can connect an external access controller. And the two devices will transmit the card No.
via Wiegand 26 or 34.
4. Drag the block to set the time interval and pulse width.
Note
●
The time interval ranges from 1 ms to 20 ms.
●
The pulse width ranges from 1 us to 100 us.
5. Click Save to save the settings.
Note
If you change the peripheral, and after you save the device parameters, the device will reboot
automatically.
Elevator Control
Steps
1. Click Configuration → Access Control → Elevator Control Parameters .
DS-K1T690 Series Face Recognition Terminal User Manual
113
