Note
●
Up to 4 elevator controllers can be connected to 1 device.
●
Up to 10 negative floors can be added.
●
Make sure the interface types of elevator controllers, which are connected to the same
device, are consistent.
8.6.24 Temperature Measurement Settings
Temperature Measurement Settings
You can set the temperature measurement parameters, including temperature measurement only,
temperature unit, over-temperature threshold, temperature compensation, door not open when
temperature is abnormal, etc.
Steps
1. Click Configuration → Temperature → Temperature Settings .
Figure 8-19 Temperature Measurement Settings
2. Enable Temperature Measurement.
3. Configure the temperature measurement parameters.
DS-K1T690 Series Face Recognition Terminal User Manual
115
