Note
Hik-Connect is an application for mobile devices. With the App, you can view live image of the
device, receive alarm notification and so on.
3. Check the checkbox of Enable to enable the function.
4. Optional: Check the checkbox of Custom, and you can set the server address by yourself.
5. Create a Stream Encryption/Encryption Key for the device.
Note
6 to 12 letters (a to z, A to Z) or numbers (0 to 9), case sensitive. You are recommended to use a
combination of no less than 8 letters or numbers.
6. Click Save to enable the settings.
Set ISUP Parameters
Set the ISUP parameters for accessing device via ISUP protocol.
Steps
Note
The function should be supported by the device.
1. Click Configuration → Network → Advanced → Platform Access .
2. Select ISUP from the platform access mode drop-down list.
3. Check Enable.
4. Set the protocol version, alarm receiver type, port, device ID, ISUP key, and the register status.
Note
Only 5.0 version is supported, you should set the ISUP key as well.
5. Click Save.
Configure HTTP Listening
The device can send alarm information to the destination IP or host via HTTP protocol/HTTPS
protocol.
Before You Start
The destination IP or host name should support the HTTP protocol/HTTPS protocol to receive the
alarm information.
Note
The function should be supported by the device.
DS-K1T690 Series Face Recognition Terminal User Manual
91
