Note
If authentication is failed in the configured time duration, the device will broadcast the
configured content.
3) Enter the audio content.
4) Optional: Repeat substep 1 to 3.
5) Optional: Click to delete the configured time duration.
8. Optional: Add holiday schedule.
1) Click Add to add holiday schedule.
2) Repeat step 3 to 6.
9. Click Save to save the settings.
8.6.16 Set Image Parameters
Set the video standard, WDR, brightness, contrast, and saturation.
Steps
1. Click Configuration → Image Adjustment .
2. Configure the parameters to adjust the image.
Video Standard
Set the video frame rate when performing live view remotely. After changing the standard,
you should reboot the device to take effect.
PAL
25 frames per second. Suitable for mainland China, Hong Kong (China), the Middle East
countries, Europe countries, etc.
NTSC
30 frames per second. Suitable for the USA, Canada, Japan, Taiwan (China), Korea, the
Philippines, etc.
WDR
Enable or disable the WDR function.
When there are both very bright and very dark areas simultaneously in the view, WDR
balances the brightness level of the whole image and provide clear images with details.
Brightness/Contrast/Saturation
Drag the block or enter the value to adjust the live video's brightness, contrast and
saturation.
Start/end recording video.
Capture the image.
3. Click Default to restore the parameters to the default settings.
DS-K1T690 Series Face Recognition Terminal User Manual
96
