Figure 4-2 Device Wiring
Note
●
You should set the face recognition terminal's Wiegand direction as Input to connect to a
Wiegand card reader. If connects to an access controller, you should set the Wiegand direction as
Output to transmit authentication information to the access controller.
●
For details about Wiegand direction settings, see Set Wiegand Parameters .
●
Do not wire the device to the electric supply directly.
4.3 Wire Secure Door Control Unit
You can connect the terminal with the secure door control unit.
The wiring diagram is as follows.
DS-K1T690 Series Face Recognition Terminal User Manual
26
