7.5.2 Authenticate via Multiple Credential
Before You Start
Set the user authentication type before authentication. For details, see Set Authentication Mode .
Steps
1. If the authentication mode is Card and Face, Password and Face, Card and Password, Card and
Face and Fingerprint, authenticate any credential according to the instructions on the live view
page.
Note
●
The card can be normal IC card, or encrypted card.
●
If the QR Code Scanning function is enabled, you can put the QR code in front of the device
camera to authenticate via QR code.
2. After the previous credential is authenticated, continue authenticate other credentials.
Note
●
For detailed information about scanning fingerprint, see Tips for Scanning Fingerprint.
●
For detailed information about authenticating face, see Tips When Collecting/Comparing Face
Picture.
●
After enabling temperature detection, the device displays the temperature information.
If authentication succeeded, the prompt "Authenticated" will pop up.
7.6 Basic Settings
You can set the sound settings, time settings, beauty and sleeping (s).
Long tap on the initial page for 3 s and slide to the left/right by following the gesture and login the
device home page. Tap Basic.
Figure 7-10 Basic Settings Page
DS-K1T690 Series Face Recognition Terminal User Manual
64
