HikRobot CameraLink Area Scan Camera, User Manual

Page: 34 / 95

CameraLink Area Scan Camera
·
User Manual
24
Figure 5-8 Set Counter Trigger
When using counter as trigger source, you need to set relevant parameters under Counter And
Timer Control. For specific parameter function and setting, please refer to the following table.
Table 5-3 Description of Counter And Timer Control
Parameter Read/Write Description
Counter Selector Read and write It selects counter source. Counter 0 is
available only at present.
Counter Event Source Read and write It selects the signal source of counter
trigger. Line 0, Line 2, and CC 1/2/3/4
are available. It is disabled by default.
Counter Reset Source Read and write It selects the signal source of resetting
counter. Software is available only. It is
disabled by default.
Counter Reset
Write is available
under certain
condition It resets counter and it can be
executed when selecting Software as
Counter Reset Source.
Counter Value Read and write It is the counter value with the range
of 1 to 1023.
Counter Current Value Read only It displays the number of executed
external trigger.