CameraLink Area Scan Camera
·
User Manual
49
Table 8-1
Data Format of Different Pixel Formats
Pixel Format
Data Format
Mono 8, Bayer 8
8
Mono 10/12, Bayer 10/12
16
RGB 8
24
You can set pixel format as shown below.
Steps:
1.
Click Image Format Control > Pixel Format.
2.
Set Pixel Format according to actual demands.
Figure 8-5
Set Pixel Format
For max. frame rate of different pixel formats, please refer to the actual condition.
8.5 Set Test Pattern
The camera supports test pattern function. When there is exception in real-time image, you can
check whether image of test mode have similar problem to determine the reason. This function is
disabled by default, and at this point, the outputted image by the camera is real-time image. If this
function is enabled, the outputted image by the camera is test image.
You can set test pattern as shown below.
Steps:
1.
Click Image Format Control > Test Pattern.
2.
Set Test Pattern according to actual demands.
Summary of Contents for CameraLink Area Scan Camera
Page 1: ...CameraLink Area Scan Camera User Manual ...
Page 95: ...UD14755B ...
