CameraLink Area Scan Camera
·
User Manual
14
Table 3-4
Attribute Description
Attribute
Description
Device Control
You can view camera information, edit its name and
reset the camera.
Image Format
Control
You can view and set the camera’s resolution, image
reverse function, pixel format, region of interest, test
pattern, etc.
Acquisition Control
You can view and set the camera’s acquisition mode,
frame rate, trigger mode, exposure time, etc.
Analog Control
You can view and set the camera’s analog signal,
including gain, black level, Gamma correction,
sharpness, etc.
LUT Control
You can view the Look-Up Table (LUT) and set its index
and value.
Shading Correction
You can set shading correction to correct shade.
Counter And Timer
Control
You can set the function of Counter 0 as trigger source.
Digital IO Control
You can set the different input and output signals.
Transport Layer
Control
You can set the parameters of transport layer of the
camera.
User Set Control
You can save or load the camera’s parameters. You can
set the default parameter when running the software.
For specific attributes, please refer to the actual one you got.
3.2.5 Transport Layer Control
The value of camera sensor geometry in the frame grabber software should be the same with that
of Device Tap Geometry in the MVS. Inconsistent parameters may lead to image exception.
You can go to Transport Layer Control > Device Tap Geometry to check or set the camera mode.
The CI Configuration in the MVS displays the mode that the camera adopts currently.
Summary of Contents for CameraLink Area Scan Camera
Page 1: ...CameraLink Area Scan Camera User Manual ...
Page 95: ...UD14755B ...
