HighLine Bale Pro CFR651, Operator'S Manual

Page: 72 / 77

Section 7 - Troubleshooting
7.0 TROUBLESHOOTING
Symptom Problem Solution
Bale lifting problems Forks do not raise Check hydraulic
connections and lines
Electric solenoid valve (if
present) Check the electrical
connection to the solenoid
Check that hydraulic fluid
passes through the solenoid
valve
Bale tips off back of forks Narrow forks for a better lift
on bale
Bale hung up on forks - not
going into the tub Cycle feeder chain left to
right to pull bale into tub
Ensure forks are fully
lowered prior to backing into
the bale to prevent stabbing
the bale. The bale wrap
would then prevent the bale
from falling into the tub
Bale falls through forks Adjust forks for bale size
Plugging in discharge area Snow and ice on bales
causing blockage in tub Have flail drum rotating
while loading bale to clear
out discharge area
Trying to “lift” thrown
material too much Reduce the lower discharge
door height
Reduce the speed of the
feeder chain
Material builds up on one
side of bale in tub Bale unwrapping in tub Reverse direction of feeder
chain to consume material
buildup
Page 7-1