HighLine Bale Pro CFR651, Operator'S Manual

Page: 51 / 77

Section 4 - Operating the CFR 651
8. Begin processing material.
- Start the feeder chain to move the
bale towards the flail drum.
Note: If the processor vibrates
e x c e s s i v e l y , i m m e d i a t e l y
disengage PTO and stop the
tractor.
Wait for all flail drum rotation to
stop before approaching the
processor.
Inspect for blockages, missing
flails or other causes of the
vibration.
9. Adjust the feeder chain speed and
direction.
- If loose material builds up near the
top of the bale in the tub:
- slow down the feeder chain to
allow the flail drum to process
the material.
- slow down the feeder chain to
avoid the feeder chain from
removing material from the
bale.
- To remove loose material buildup,
reverse the feeder chain for a short
time and then restore the chain
direction to move the bottom of the
bale towards the flail drum.
Adjust Feeder Chain Speed and Direction
216100
Page 4-8