HighLine Bale Pro CFR651, Operator'S Manual

Page: 67 / 77

Section 6 - Storing the CFR 651
5. Lock the CFR 651 flail drum.
- Place the flail drum lock pin into the
tube on the front tub wall.
- Allow the lock pin to slid into the
processing chamber.
- Manually rotate the flail drum until the
lock pin drops into place locking the
flail drum.
- Push the lock pin down firmly to
ensure it is fully engaged into the flail
drum.
6. Remove any material that has built up
around the feeder chain bearings.
- Remove any material from the upper
feeder chain bearing.
- Remove any material from around the
lower feeder chain bearing.
- Remove any material from the
channel between the upper and lower
feeder chain bearings.
Lock the Flail Drum
213018
Remove Material - Upper Chain Bearing
212016
Remove Material - Lower Chain Bearing
212015
Page 6-2