HighLine Bale Pro CFR651, Operator'S Manual

Page: 26 / 77

Section 3 - Preparing the CFR 651
Remove Flail Drum Access Panels
213177C
3.0 PREPARING THE CFR 651
Check these items each time before using
the machine.
1. Park the tractor and CFR 651 on level
ground.
-
Engage the tractor parking brake and
shut down the tractor.
2. Ensure that all decals are clean and in
place.
3. Ensure that the Slow Moving Vehicle
(SMV) sign is clean and visible.
Shut down the tractor completely
and set the parking brake.
Disconnect the PTO from the
tractor before doing any work near
the flail drum.
Do not place hands in the CFR
651 when it is rotating. Contact
with exposed rotating flails will
cause serious injury or death.
4. Check the condition of the flail drum.
- Remove the flail drum access panels.
- Remove the clip pins.
- Remove the panel pins (1).
Lift the panels out.
Park on Level Ground
216194
Page 3-1