HighLine Bale Pro CFR651, Operator'S Manual

Page: 32 / 77

Section 3 - Preparing the CFR 651
15. Adjust the bale loader forks for the
width of bale being processed.
- For bales 6 feet (1.8 m) in diameter
-
Place both fork inner u-bolts
against the brace (1).
- For bales 5 feet (1.5 m) in diameter
-
Place both fork outer u-bolts
against the inside of the brace (2).
- For bales 4 feet (1.2 m) in diameter
-
Place both outer u-bolts (3) a
distance of 6" (152 mm) from the
edge of the vertical frame post.
Fork Width - 6 Foot (1.8m) Bales
201209C
Fork Width - 4 Foot (1.2m) Bales
201211C
Fork Width - 5 Foot (1.5m) Bales
201210C
Page 3-7