HighLine Bale Pro CFR651, Operator'S Manual

Page: 52 / 77

Section 4 - Operating the CFR 651
10. Adjust the aggression level (if
needed).
- If the different rate of material
discharge is desired:
- Stop the tractor and remove the
key.
- Wait until all flail drum rotation has
stopped.
- Move the discharge rate lever.
- Higher Number = more
material discharged.
- Lower Number = less material
discharged.
11. Re-adjust the level of the lower
discharge door (if needed).
- Snap the handle into a slot (2) to
fasten it in position.
12. Stop the feeder chain before loading
another bale into the processor.
Lower Discharge Door
213182C
Adjust Aggression Level
213021
Stop the Feeder Chain When Loading
216196
Page 4-9