HighLine Bale Pro CFR651, Operator'S Manual

Page: 57 / 77

Section 5 - Maintaining the CFR 651
Adjust the Feeder Chain Tension
- Loosen the bolts on the front and rear
upper feeder chain bearings (1).
- Loosen the jam nut (2) on front and rear
adjustment bolt.
- Turn the adjustment nut (3) to change the
chain tension.
- Stand in the tub and hold the center of
one of the feeder bars.
- Lift the bar.
-
The bottom of the bar should be 1"
from the plastic slider.
- Verify the adjustment is the same at the
front and back by measuring the distance
between the bolt tabs (4).
- Tighten the jam nuts (2).
Adjust The Feeder Chain Tension
212008C2
Check Tension of the Feeder Chain
212054
Page 5-4