HighLine Bale Pro CFR651, Operator'S Manual

Page: 48 / 77

Section 4 - Operating the CFR 651
4. Set the level of the lower discharge door.
(No Feed Chopper Present)
- The lower discharge door adjustment
handle (1) is located on the rear tub
wall.
- There are 3 door positions:
- The lowest position is often used
for wet material or for a shorter
throw distance.
- The middle position is often used
for average material or medium
throw distance.
- The highest position is often used
for dry material, longer throw and
also for bunk feeding.
- Snap the handle into a slot (2).
Note: When a Feed Chopper is present,
there are other settings that must
be adjusted. Refer to the Feed
Chopper Operator’s Manual for
these adjustments.
- Visually check on the door position, by
looking at the discharge side of the
machine.
Stay back from an operating
machine which can discharge
objects a long distance.
Lower Discharge Door
213182C
Visually Check the Door Position
212047
Page 4-5