HighLine Bale Pro CFR651, Operator'S Manual

Page: 38 / 77

Section 3 - Preparing the CFR 651
NetWrap or Twine Removal Procedure
Remove netwrap or twine that is around the
flail drum.
Note: Remove the twine from the flail drum
and feed rollers every 25 bales.
Premature bearing failure can occur if
twine is allowed to build up on the flail
drum.
Shutdown tractor completely and
set the parking brake.
Disconnect the PTO from the
tractor before doing any work near
the flail drum.
Do not remove the side panels
while flail drum is rotating.
Contact with rotating flail drum will
cause serious injury or death.
Ensure the side panels are in
place an secured during operation.
1. Raise the forks to the fully raised position.
2. Install the cylinder lock onto the left fork
cylinder.
Install and secure the cylinder
lock before going under raised
bale forks.
Raise Forks and Lock
216195
Page 3-13