HighLine Bale Pro CFR651, Operator'S Manual

Page: 53 / 77

Section 4 - Operating the CFR 651
13. Crossing ditches and steep inclines.
- Cross ditches or inclines at about a
30° approach angle.
- Do not approach a ditch or steep
incline straight on as this may collapse
the driveline to its shortest length,
causing damage by pushing the PTO
into the tractor or into the drivebox or
downward onto the PTO shaft,
breaking it off.
14. Making turns.
- Do not make turns sharper than 80°.
- Angles greater than 80° can result in
damage to the constant velocity joint
and other driveline components.
- Ensure that the tractor tire does not
contact the CFR 651 tub or frame.
Cross Ditch at 30° Angle
107072
Driveline Collapsed in Steep Ditch
201221
Turn Less Than 80 "
109040
Page 4-10