HighLine Bale Pro CFR651, Operator'S Manual

Page: 58 / 77

Section 5 - Maintaining the CFR 651
Adjust the Belt Tension for the Flail Drum
Drive
The belt tension adjuster will adjust to keep
the belt tight within a range of tension.
The tensioner should be set to a tension of
25 degrees.
To Adjust the Belt Tension:
- Loosen the top nut (1).
- Place a socket wrench onto the nut (3)
on the tension adjustment arm.
- Take up the tension of the belt
when the lower nut is
loosened.
- Loosen the lower nut that is within the
curved adjustment arc.(2).
- Move the socket wrench to set the belt
tension to 25 degrees.
- Tighten the lower nut (2) to keep the
tension.
- Tighten the upper nut (1).
Set Tension to 25 Degrees
212025
Adjust Belt Tension
216206C
Page 5-5