High End Systems studio color, User Manual

Page: 76 / 114

A-8 Studio Color User’s Manual
Unit is not respond-
ing to controller • wrong fixture DMX
address
• bad data cable(s)
• link not terminated
• set the address as outlined in
“Address Menu” on page 3-5
• check and replace data cables
as needed
• terminate link as outlined in
"Data Cabling" on page 1-11
Unit is producing
unexpected results • incorrect DMX start-
ing address on the
controller
• last fixture is not ter-
minated
• Refer to "DMX Starting Chan-
nel" on page 1-12
• terminate fixture
Display is not
functioning
• display is turned off
• power connectors are
loose
• bad logic board
• Refer to “Setting Display Out-
put” on page 3-14
• refer to qualified technician
• refer to qualified technician
Cracks have devel-
oped in the color
mixing wheels-
“stress relieving fis-
sures” • heat and natural
expansion of the glass • stress relieving fissures are
normal and do not in any way
degrade the functionality or the
performance of the fixture
Table A.2. General Troubleshooting
Problem Probable Cause Solution