High End Systems studio color, User Manual

Page: 74 / 114

A-6 Studio Color User’s Manual
S E N 1
E R R
cyan color mixing,
fixed color wheel,
or effects wheel 1 • problem with cyan
wheel tab, sensor, or
motor
• problem with fixed
color wheel tab, sen-
sor, or motor
• problem with effects
wheel 1 tab, sensor,
or motor
• bad sensor 1
• run self-test on
sensor 1
• refer to qualified
service personnel
S E N 2
E R R
magenta, yellow, or
effects wheel 2 • problem with
magenta wheel tab,
sensor, or motor
• problem with yellow
wheel tab, sensor, or
motor
• problem with effects
wheel 2 tab, sensor,
or motor
• bad sensor 2
• run self-test on
sensor 2
• refer to qualified
service personnel
T I L T
C O N N
tilt connector is dis-
connected • tilt connector is dis-
connected
at the logic
board or at the sensor
• refer to qualified
service personnel
T I L T D R V
E R R
tilt driver error • motor wire shorted to
ground
• bad driver chip
• bad motor
• refer to qualified
service personnel
T I L T
E N C D
tilt encoder failure • external obstruction
• bad connector
• remove obstruction
• refer to qualified
service personnel
T I L T
E R R
tilt homing error • loose pinion gear
• loose motor cable
• incorrect cabling to
tilt input
• bad sensor
• bad motor
• run self-test and
refer to qualified
service personnel
Table A.1:Display Error Messages
Display
Message
Problem Explanation Solution