High End Systems studio color, User Manual

Page: 55 / 114

Chapter 3 Menu System 3-5
Introduction
Menu System
3
Address Menu
Use the following subsection to manipulate the
A d d R
functions for setting the
starting channel.
Setting the Starting Channel
The starting channel can be set by fixture number or DMX channel address. To
change the way the starting channel is set, refer to “Setting the Starting Channel by
DMX Channel or by Fixture Number” on page 3-14. To set the starting address by
fixture number, complete the following procedure:
1. Observe the display. Initially, it will display the software version (
V x x x
)
and then the fixture number (
F 0 1
).
2. Press and hold the <
MENU>
button until the display changes to
A d d R
.
3. Press the <
ENTER
> button to edit the
A d d R
field.
4. Using the up and down buttons on the front of the unit, set the address. The
display will flash when it is moved from the previous value.
5. Press the <
ENTER
> key to accept the appropriate channel. The display will
stop flashing.
Note: if the <
ENTER
> key is not pressed, the fixture will not store the starting
channel.