High End Systems studio color, User Manual

Page: 89 / 114

Appendix B Accessory Installation B-5
Introduction
Acce
ss
ory
Inst
allation
B
10. Take special note of the index positions on the color wheel. Refer to Figure
B.5.
Figure B.5. Color Wheel and Factory Index Positions
11. Gently push the glass towards the spindle in the center of the color wheel (A),
lift the edge away from the spindle (B), and remove the glass. Refer to Figure
B.6.
Figure B.6. Removing the Dichroic Glass
Caution : Do not bend or lift the inner tabs up, as you could damage them.
12. Using the above steps in reverse, install the new dichroic into the color wheel
with the coated side down (towards the lamp).
index tab
1
Open
2
¾ CTO
6
Aqua
5
Red
3
Pink
4
Magenta
5
Red
5
Red
A. B.