High End Systems studio color User Manual Download Page 85

Page: 85 / 114

Appendix B Accessory Installation

B-1

Introduction

Acce

ory

Inst
allation

Appendix B

Accessory Installation

In this chapter you will:

install accessory dichroic glass (B-2)

install an accessory lens (B-7)

install a light snoot (B-8)

Overview

This appendix provides information on accessory installation. A list of
approved accessories is provided in the “Introduction” on page I-12.

Caution

: Do not install accessories that are not specified by High End Systems. Doing

so may damage the fixture and void the warranty.

Warning:

Before performing any procedure in this Appendix, adhere to the following

safety precautions:

•

disconnect the unit from power

•

allow the unit to cool for a minimum of 10 minutes

Summary of Contents for studio color



















































































































Search results

Summary of Contents for studio color

Reviews:

Related manuals for studio color

Brands by name

Popular brands

High End Systems studio color, User Manual

Search results

Summary of Contents for studio color

Reviews:

Related manuals for studio color

Brands by name

Popular brands