High End Systems studio color, User Manual

Page: 27 / 114

Chapter 1 Installation and Setup 1-1
Introduction
Inst
allation and Set
up
1
Chapter 1
Installation and Setup
In this chapter you will:
S
unpack Studio Color (1-1)
S
construct a road case (1-2)
S
construct line cord caps (1-5)
S
learn the power requirements (1-5)
S
construct data cables (1-5)
S
construct terminators (1-6)
S
install the lamp (1-7)
S
mount the fixture (1-9)
S
connect data cables (1-11)
S
set the starting address (1-12)
S
patch fixtures into the controller (1-14)
S
configure your DMX controller to control Studio Color (1-15)
Unpack Studio Color
In this section you unpack your Studio Color and verify that it arrived complete
and without any damage.
Save the Shipping Materials
Do not discard the shipping carton and packing materials. The carton and packing
materials are specifically designed to protect the fixture during transport.
If you ever need to return a product for repair or maintenance, you must return it in
its original shipping carton and packing materials. You will be billed for a new
shipping carton and new packing materials if you return your Studio Color
in a
non-factory shipping carton with non-factory packing materials.
Note:
Before returning anything to the factory, be sure to call your High End
Systems Dealer/Distributor for a Return Authorization Number. The factory
can not accept any goods shipped without an RA number.
Inspect the Contents
The carton contains the following:
• Studio Color fixture
• Philips MSR 575/2 or MSD 575 series lamp
• Studio Color User’s Manual
• Studio Color Quick Reference Card