High End Systems studio color, User Manual

Page: 62 / 114

3-12 Studio Color User’s Manual
Self Tests
Studio Color has the following self tests to check the following functions:
•
A L L
- runs through each self test twice
•
d I M
- dimming iris moves from closed to full open
•
S H U T
- moves through all strobe functions
•
F R S T
-
rotates the effects wheel 2 from 0 to 255 and back to 0 (dim at full)
•
L E N S -
rotates effects wheel 1 through 4 positions (dim at full)
•
C Y A N
- rotates the cyan color wheel from 0 to 255 and back to 0 (dim at full)
•
Y E L W
- rotates the yellow color wheel from 0 to 255 and back to 0 (dim at
full)
•
M A G N
- rotates the magenta color wheel from 0 to 255 and back to 0 (dim at
full)
•
C O L R
- rotates from position 1 to 6 (dim at full)
•
T I L T
- moves the tilt motor from 0º to 370º
•
P A N
- moves the pan from 0º to 240º
To begin the self-test function, complete the following procedure:
1. Hold the <
MENU
> button until the display changes to
A d d R
.
2. Using the up and down buttons, scroll down to the
T E S T
field and
press the <
ENTER
> button.
3. Using the up and down buttons, scroll down to the desired test from the
choices above and press <
ENTER
>. The fixture will perform the
desired test.
4. To exit the test in progress, press the <
MENU
> button.
Changing Functions
The function modes are reserved for future use.
Changing Boot Codes
When Studio Color is uploaded, occasionally it is necessary to include a new boot
code with the new software. This is apparent when
b O O T d I f f
appears in the
display. To accept and store the new boot code, complete the following procedure:
1. Hold the <
MENU
> button until the display changes to
A d d R
.
2. Using the up and down buttons, scroll down to the
T E S T
field and press
the <
ENTER
> button.
3. Using the up and down buttons, scroll down to the
b O O T
field and press
the <
ENTER
> button. The fixture will display
D O N E
,
R S T
, and home.
Caution: Do not remove power from the fixture during the above procedure.