HES HS2510-N, User Manual

Page: 22 / 64

20
Hwang Sun Enterprise Co., Ltd.
20 Edition 2012/02
3.3 Preparations Before Operation
1.Load the clean and dry hot melt adhesive
into the melting tank.
2.Close the applicator lid immediately to
prevent contaminants from falling into the
tank.
Note: Switch off the main power and shut
down the external power supply to keep off
the
remained high voltage in all
connectors.
2) Main Power Switch
Put this “Main Power Switch” on “ON”
position, then the indicator will light,
to show the power of the applicator is on.
3)“START” button for motor power
Press this “START” button to turn on the
motor; when the temperature of the tank
up to the setting point, the motor will
start.
4)”STOP” button for motor power
Press the “STOP” button to shut-down the
motor.