HES HS2510-N, User Manual

Page: 6 / 64

4
Hwang Sun Enterprise Co., Ltd.
4 Edition 2012/02
B. Heating Solvents
1. Do not use a open flame or uncontrolled heating device to heat solvents.
2. Do not use paint-type solvents under any circumstances. These solvents are
volatile and may be a fire and/or toxic-vapor hazard even at room temperature.
3. Always be sure that work area is adequately ventilated.
4. Avoid prolonged or repeated breathing of solvent vapors.
IF MOLTEN MATERIAL COMES IN CONTACT WITH THE SKING:
If molten adhesive comes in contact with the skin, do not forcefully remove hot melt
material from the skin. Immediately cool affected skin areas with cold, clean water,
till the adhesive stuck on the skin is completely cooled down, then cover the affected
area with a clean, wet compress.
In case of the severe burns, keep the patient to preserve body heat, and seek the
medical attention immediately.