Hermle UWF 902 H, Operating Manual, Page: 62 / 135

3-29
3.19 Miscellaneous Functions
3.19 Miscellaneous Functions
M 00 Program stop
M 02 Stop program run
M 03 Milling spindle „on“ clockwise
M 04 Milling spindle „on“ counter-clockwise
M 05 Milling spindle „off“
M 06 Tool changing call manual
M 07 Cooling lubricant II „on“
M 08 Cooling lubricant I „on“
M 09 Cooling lubricant „off“
M 10 FREE
M 11 FREE
M 12 WZW HORIZONTAL manual (special function for intermediate gear)
M 13 Milling spindle „on“ clockwise and cooling lubricant „on“
M 14 Milling spindle „on“ counter-clockwise and cooling lubricant „on“
M 15 Division impulse
M 16 FREE
M 18 Lubrication impulse central lubrication
M 19 Spindle orientation
M 20 Swarf conveyor „on“ (cyclic) (Only with locked cabin)
M 21 Swarf conveyor „off“
M 22 FREE
M 23 Tilting NC-rotary table "release" / universal table "release"
M 24 Tilting NC-rotary table "clamp" / universal table "clamp"
M 25 Table plate „release“
M 26 Table plate „clamp“
M 29 Swivel in/out vertical head
M 30 Program end with jump to start of programm
M 31 Open cabine at M02 / M30
Automatic unlocking of the cabine at M02 / M30
M 37 Select parameter standard
M 38 Leave parameter sonder
M 39 Reset frequency modulator
M 50 Internal coolant supply 20 bar ON
M 51 Internal coolant supply 40 bar ON
M 52 Internal coolant supply OFF
M 77 Display of temperatures of feelers
M 78 Switch off temperature compensation
M 79 Switch on temperature compensation
M 80 Define magazine position
M 105 Machining with low K
v
M 106 Machining with low K
v