Hermle UWF 902 H, Operating Manual, Page: 60 / 135

3-27
1
3
2
4
II I III
3.18 Changing the Machine Parameters
„USER PARAMETER“ will appear.
• Using the arrow key select the desired user
parameter - in this case parameter No. 8,
„MACHINE CODE“
• Change the value of parameter 8 simply by entering
the new value. You can calculate the machine
code with the aid of the table on the next page.
• Press „END“ key [4]. By doing this, the entered
value is stored and you exit the user parameter
function.
3.18 Changing the Machine
Parameters
The „machine code“ parameter, which depends on
the particular version of the machine, is entered the
factory.
It is to be found in the user parameters.
If you wish to change the machine’s optional features,
these parameters must be re-entered corresponding
to the changed options.
This is necessary in order to adjust the control to the
modified for equipment.
In order to determine the machine code, add the
position value of the current options and enter this
value in the user parameter value. The position
values of the individual options can be found in the
table on the next page.
Proceed as follows:
• Press the changeover switch [1]. The control is
switched to programming mode.
• Press the „MOD“ key [2].
• Press the softkey „USER PARAMETER“ [3].
On the screen’s dialog display the display: