manualshive.com logo in svg

HermanMiller Embody 100210688, Manual

Share
Download
HermanMiller Embody 100210688 Manual Download Page 80

©

2008 Herman Miller, Inc., Zeeland, Michigan  Printed in U.S.A.

™

L

, 

Z

, 

Y

, Embody, are trademarks of Herman Miller, Inc.

 

 Illustrations and specifications are based on the latest product information available at the time of publication. The right is reserved to make  

         changes in design and specifications at any time, without notice, and also to discontinue products.

1B4YHW REV C

28

Credit Card thickness gap when in place

Secure the back Seat Clips by tapping 
with palm of hand until seated firmly in 
place. An audible click will typically be 
heard when clips have engaged 
properly.

There should be a credit card’s thick-
ness between the seat back and bottom 
once in place.

Bolts

Install the lower back bolts using t-40 torx 
wrench (90 in/lbs)

29

30

Install lower spine bolts using t-40 torx 
wrench (90 in/lbs)

Summary of Contents for Embody 100210688

































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands