manualshive.com logo in svg

HermanMiller Embody 100210688, Manual, Page: 70 / 128

Share
Download
HermanMiller Embody 100210688 Manual Download Page 70

©

2008 Herman Miller, Inc., Zeeland, Michigan  Printed in U.S.A.

™

L

, 

Z

, 

Y

, Embody, are trademarks of Herman Miller, Inc.

 

 Illustrations and specifications are based on the latest product information available at the time of publication. The right is reserved to make  

         changes in design and specifications at any time, without notice, and also to discontinue products.

1B4YHX REV A

Set front of rear tilt cover onto bushings in 
pivot assembly.  Press down on back of cover 
making sure clips fully engage into slots in tilt. 

Bushing

Insert Tilt Limiter Lever into assembly.

 

Return Wire Clip to end of Lever.

Tilt Limiter Lever

Wire Clip

22

23

24

21

Position Replacement Rack onto assembly.  
Install Flange Bushing and Shoulder bolt.

 

21

Tighten Shoulder Bolts to 250 in/lbs.

Install 2 Hex Washer Screws.  Tighten 
Screws to 55 in/lbs.

25

Shoulder Bolt

Flange Bushing

Hex Washer
Head Screw

Summary of Contents for Embody 100210688

































































































































Reviews:

No comments